Table of Contents
Advertisement
•
AMD FreeSync Premium: To control support AMD FreeSync Premium or not,
default is "On".
•
Refresh Rate Num: Display the panel's current refresh rate on the screen.
•
Ultra-Wide Mode: Default is "Off". Can select "21:9" or " 32:9".
Note:
•
When User selects 21:9" or 32:9", Wide mode will be switched to 1:1 automatically
and grayed out.
•
When User selects "Off", Ultra-Wide Mode will go back to original setting.
•
Ultra-wide mode only supports HDMI4 (2.1), DP and Type-C sources and
would be grayed out for function of PIP/PBP and 1:1 in wide mode.
•
Screen Position: Default is "0". User can select "2", "1", "0", "-1", or "-2".
Screen Position = 2, Top
Screen Position = 1, Between Center and Top
Note:
•
This function is only enabled if Ultra-Wide Mode is set to "21:9" or "32:9".
•
This function is grayed out when Ultra-Wide Mode is set to "Off".
CG48 User Guide English
Screen Position = 0, Center
Screen Position = -1, Between Center and Bottom
20
Screen Position = -2, Bottom
Advertisement
Table of Contents
