Using An R-Series Radius Tool (R24 Or R33) - Emery TM100 Operation Manual

Using an R-Series Radius Tool (R24 or R33)

One person holds the Radius Tool Handle and
•
applies pressure on the point.
The second person pushes the TM100 Taping
•
Machine forward, allowing the machine to follow
the curved path.
NOTE: Be sure to apply downward
pressure to the machine. This will eliminate wrinkling
in the tape.
Other notes:
• Recommend tape widths for this operation are 1.5" and narrower.
© 2022 Emery Game Line
Person 1
Page: 16
Person 2