Using A Minorly Offset Guiding-Line - Emery TM100 Operation Manual

Using a Minorly Offset Guiding-Line

• Slightly loosen both screws in the
Pointer Adapter.
• Rotate the Pointer until it is aligned
with the offset guiding-line.
• Tighten the two screws in the
Pointer Adapter to hold the
position.
Other notes:
• Loosening the screws will only allow for an offset of about 1.5"
both ways. See next page for achieving a larger offset.
© 2022 Emery Game Line
Gap between
tape lines
Page: 10
1.5" offset
guiding-line