Table of Contents
Advertisement
4.7.4 Erase DB
Erase DataBase button allows the deletion of ALL data and experiments stored on the Librae
Database. This funcion is normally NOT required.
After the button is pressed, a Confirm window appears. Press OK to delete the database. Press
CANCEL to escape.
NOTE: ONLY Use this command after a software update procedure. Refer to paragraph 4.7.1 for
details.
WARNING: ALL YOUR DATA WILL BE PERMANENTLY DELETED!
4.7.5 Results
Results button shows (Figure 4.7.5.1) the results of the experiments stored inside Librae
Incapacitance Tester.
Every result box contains:
1.
Date and time of the experiment
2.
Treatment, ID, protocol, stage and trial
3.
Experiment accepted or rejected
4.
Duration
5.
Functional mode
6.
Peak and average values for each paw
Use the up/down arrows to scroll through results.
Figure 4.7.5.1
NOTE: The result box displays only a small set of data. Download the .csv file for the complete
experiment data.
Page: 28
< Librae instruction manual
Back to contents
4 Operation
4.7.6 USB Storage
USB Storage menu (Figure 4.7.6.1) allows to save experimental data to USB memory key,
Figure 4.7.6.1
Data will be exported in .csv format. Use a text editor, spreadsheet or Microsoft Excel to open
and analyze your experiment data.
NOTE: INSERT a USB memory key BEFORE SAVING or LOADING any data.
4 Operation
Back to contents
Back to contents
Librae instruction manual >
Page: 29
Advertisement
Table of Contents
