Rapid BTX10 Operator's Manual page 15

the instructions. Charging improperly or at
temperatures outside the specifi ed range
may damage the battery and increase the risk
of fi re.
6) SERVICE
a) Have your power tool serviced by a qual-
ifi ed repair person using only identical
replacement parts. This will ensure that the
safety of the power tool is maintained.
TACKER SAFETY WARNINGS
• Always assume that the tool contains
fasteners. Careless handling of the tacker
can result in unexpected fi ring of fasteners
and personal injury.
• Do not point the tool towards yourself or
anyone nearby. Unexpected triggering will
discharge the fastener causing an injury.
• Do not actuate the tool unless the tool is
placed fi rmly against the workpiece. If the
tool is not in contact with the work piece, the
fastener may be defl ected away from your
target.
• Use caution while removing a jammed
fastener. The mechanism may be under
15