Advertisement
Advertisement
Table of Contents
Related Manuals for stefani Whole Of House
Summary of Contents for stefani Whole Of House
- Page 1 Installation and Operation Manual...
- Page 2 Pressure: 1205kpa/175psi - minimum pressure of 69kPa (10psi) and at a maximum Temperature of 40 degree Celsius. Stefani Warrants this filter to be free of defects in material and workmanship for a period of one year * from the date of purchase (* Warranty period excludes filter cartridges which are consumable items).
- Page 3 LIST OF PARTS The Stefani Whole House Water Filtration Housing component identification & content check list Description Product No. Filter Housing 10 inch HOUSING Bracket BRACKET Hex Head Screw for Manifold Bracket 8pcs/bag SCREW-8 Wrench WRENCH Brass Nipples 3/4" BSP Threads...
- Page 4 This filter housing must be mounted vertically. Make sure it fits comfortably into the location you have selected for it to be installed and check that there is a suitable connection to cold water supply. The connection of the filter housing head is 1’ BSP threads When affixing the mounting bracket to the filter housing head, use only screws provided to avoid damaging the filter housing head.
- Page 5 Filter Cartridge Replacement Instructions NOTE: Before changing cartridge, turn off water supply. Place a bucket under the filter to catch the small amount of water that will run out after the housing removal. Turn the mains water off and close the shutoff valve at filter head if installed. Relieve pressure in housing by pushing red vent button.
- Page 6 Save insofar as they may be excluded by law, this warranty is given in lieu of all other expressed or implied warranties or conditions and STEFANI shall in no event be held liable for damages or delays caused by defects and assume no responsibility for unauthorised repairs.
Need help?
Do you have a question about the Whole Of House and is the answer not in the manual?
Questions and answers