Advertisement
MTBP27
You will need a Phillips Head Screw Driver and a Tape Measure to Assemble.
STEP 1 (Round Table Top): Place Table Top(C) on a clean flat surface with
desired table finish face down. Using a tape measure, position assembled legs
at an equal distance from one another as shown in Figure B. Then, attach the
assembled Legs to Table Top using 6 Screws(A) per Leg.
EQUAL
C
EQUAL
STEP 1 (Rectangle Table Top): Place Table Top(C) on a clean flat surface with desired table finish face
down. Position assembled legs as shown in Figure C. Then, attach assembled Legs to Table Top using 6
Screws(A) per Leg.
STEP 2: Using 2 people, flip the table over and adjust leveling glides accordingly.
Any problems or questions call Regency Office Furniture at 1-866-816-9822 or email customerservice@regencyof.com
·
Kee Post Table Legs INSTRUCTIONS
You will need 2 person(s) for this assembly.
*NOTE: Place Legs at
least 1-inch away from
Edge Table*
Figure B
C
*NOTE: Place Legs at
least 1-inch away from
Edge Table*
Figure C
Advertisement
