Advertisement
Quick Links
REGENCY
REGENCY
Space Solutions
Space Solutions
ASSEMBLY INSTRUCTIONS
TOOLS NEEDED: An Adjustable Wrench OR 10mm and 14mm Socket are required for assembly.
INCLUDED PARTS
A
(2) Pan Slide Frames
B
(6) Crossbars
• (4) Top/Mid (Long)
• (2) Bottom (Short)
C
(4) 5" Casters
D
(8) U Brackets
E
(12) Bolts
• (8) 10mm (Top/Mid)
• (4) 14mm (Bottom)
FULL HEIGHT
BUN PAN RACK
FINAL PRODUCT
REGENCYTABLESANDSINKS.COM
B
D
A
C
E
Need Help?
Scan here to follow along
with the full assembly video!
12/2021
Advertisement
Summary of Contents for Regency FULL HEIGHT BUN PAN RACK
- Page 1 FULL HEIGHT REGENCY REGENCY BUN PAN RACK Space Solutions Space Solutions ASSEMBLY INSTRUCTIONS TOOLS NEEDED: An Adjustable Wrench OR 10mm and 14mm Socket are required for assembly. INCLUDED PARTS FINAL PRODUCT Need Help? Scan here to follow along (2) Pan Slide Frames...
- Page 2 ASSEMBLING THE PAN RACK Attach U Brackets (2 for each Crossbar) and to Insert (2) Long Crossbars into the top holes of the the outside of the Pan Slide Frames using the Pan Slide Frames. 10mm Bolts. Hand-tighten the bolts* and repeat the process for the other side. Repeat steps 1 & 2 for the (2) Middle Crossbars. Insert the (4) Casters** into the bottom of the Once the casters are properly aligned, the Frames. The locking casters should be installed in remaining (2) Short Crossbars can be installed on the same end of the rack so they can easily be set. the bottom of the rack using the 14mm Bolts.*** Put a bun pan in both the top and bottom of the Tighten each bolt with a wrench. Your bun pan rack to ensure your bun pan is square. rack is now ready to use. NOTE: Be sure to not over-tighten the bolts, or you may damage the Frame and/or Crossbars. ** NOTE: Make sure the hole in the caster post is aligned with the hole in the collar. *** NOTE: The bottom Crossbars do not require U Brackets, they can be bolted on directly though the hole in the collar. REGENCYTABLESANDSINKS.COM...