Advertisement
Available languages
Available languages
4
CLEANING THE INLET FILTER
1
NOTE :
Do not allow the filter to become clogged as this may cause power reduction
or may damage the motor.
5
OUTLET FILTER
1
- IF YOU HAVE A PROBLEM
PROBLEM
Motor does not start.
Suction force is gradually
decreasing.
Cord does not rewind fully.
Vacuum cleaner does not
pick up dirt.
This Vacuum cleaner is approved the following.
EMC Directive : 89/336/EEC , 92/31/EEC and 93/68/EEC
Low Voltage Safety Directive : 73/23/EEC and 93/68/EEC
2
OPTION
( VOLUME TYPE ONLY )
CAUSE
No power supply.
Thermal cut-out.
Nozzle, suction hose or
tube is blocked.
Check that the cord is not
twisted or wound unevenly.
Crack or hole in hose.
3
2
OPTION
EN-7
4
REMEDY
Check cable, plug and
socket.Leave to cool.
Remove the object.
Pull the cord out 2-3m and push
down the cord rewind button.
Check hose and replace if
required.
Advertisement
