Table of Contents
Advertisement
No.
Article Name
Power Button and
1
Indicator
2
Status Indicator
3
Alert Indicator
4
Beep Off Button
5
Drive Status Indicator
6
Drive Tray
7
Rail Kit Release Tab
8
Power Port
Power Supply On/Off
9
Switch
10
PSU Fan
11
Console Port
12
LAN Port
13
USB 3.0 Port
14
Expansion Port
PCI Express Expansion
15
Slot
16
RESET Button
Note:
1 To avoid shortage of material, an alternative back panel may be used. Visit
information.
2 For more information about the rail kit installation, please refer to the Quick Installation Guide that comes
with the rail kit.
3 For more information about Synology Expansion Unit supported by your Synology NAS, please visit
synology.com.
5 Chapter 1: Before You Start
Location
1. Press to power on the RackStation.
2. To power off the RackStation, press and hold until you hear a beep
sound and the Power LED starts blinking.
Displays the status of the system. For more information, see "Appendix
B: LED Indicator Table".
Displays warnings regarding fan or temperature. For more information,
see "Appendix B: LED Indicator Table".
Front Panel
Press to deactivate the beeping sound that is emitted when a
malfunction occurs.
Displays the status of drives. For more information, see "Appendix B:
LED Indicator Table".
Install drives (hard disk drives or solid state drives) here.
Push in and hold to release the RackStation from the rail kit lock.
Connect power cord here to supply power to your RackStation.
Press to turn on/off the power supply.
Disposes of excess heat and cools the PSU.
This port is used for manufacturing use only.
Connect RJ-45 network cables here.
Connect external drives, or other USB devices to the RackStation here.
Back Panel
1
Connect Synology Expansion Units
Supports two PCIe x8 add-on network interface cards.
1. Press and hold until you hear a beep sound to restore the default IP
address, DNS server, and password for the admin account.
2. Press and hold until you hear a beep sound, then press and hold
again until you hear three beep sounds to return the RackStation
to "Not Installed" status so that DiskStation Manager (DSM) can be
reinstalled.
Description
3
to your Synology RackStation.
this document
for more
2
www.
Advertisement
Table of Contents
