Before Use; Operation And Use; Connecting The Charger To The Power Supply; Connecting Your Devices - Tronic TPA 65 A1 Operation And Safety Notes

P Before use
NOTE:
• All parts have to be unpacked and the packaging
material has to be removed completely.
• Before use, verify the package contents are complete
and undamaged!
• If you notice any damage or missing parts, please
contact the dealer who sold this product.
P Operation and use
Attention! Risk of overheating! The total
power consumption of the connected devices must
not exceed 65 W (USB Type-A 20 W
Type-C 45 W
ATTENTION! If you use the product under max.
loading condition, the product may get hot. This is
normal because in this condition, the product uses
more power and therefore generates more heat.
Connecting the charger to the power
supply
Connect the power cable connector
power cable socket
Insert the power plug
mains socket. The requirements for the voltage can
be found in the "Technical data" section.

Connecting your devices

Connect your devices USB plugs into desired USB
port (USB Type A
optimum charging voltage / charging current for the
connected device is set automatically.
).
1
.
4
into an easily accessible
7
or USB type C
2
and USB
2
to the
5
). The
1
GB/IE/NI 15