Table of Contents
Advertisement
1.
10
Step E. Levelling:
This is, and obviously so, a natural
material. It might occur that the
lamp is not perfectly horizontal the
first try. To adjust, turn the knot in
step 3. (bottom right of this page)
a half or a quarter turn. This might
take a little tinkering.
Adjusting the height
Step 1. Clamp the wooden pen
at the bottom end on the cotton
cord.
Step 2. Wrap the cord around
the pen until reaching the desired
height.
Step 3. Fix the cord by clamping
the cord in the top end op the
wooden pen.
2.
PLEASE NOTE! Always check if the cord is securely clamped
inside bottom and top slit in the wooden pen (figure 3).
3.
Advertisement
Table of Contents
