Icom IC-R30 Advanced Manual page 7

INTRODUCTION
Entering and editing text (Continued)
D How to enter
Example: Entering "2m Call" as a Memory name of channel 00 in group 00.
1. Push [VFO/MR] to enter the Memory mode.
2. Push [MW].
3. Select "Manage Memory."
(Rotate [DIAL] to select it, then push [ENTER].)
4. Select group "00."
5. Select channel "00," then push [QUICK].
6. Select "Edit".
• The Edit screen is displayed.
7. Select "NAME."
• The Memory name edit screen is displayed.
8. Push [QUICK] to select a character type.
9. Push [MHz] to select "2."
L To enter symbols, select [!"#].
10. Repeat steps 8 ~ 9 to enter a name.
11. After entering, push [ENT].
• Returns to the Edit screen and the entered name is displayed.
12. Push [QUICK], then select "<<Overwrite>>."
• A confirmation dialog appears.
13. Select <YES>.
• A beep sounds, then returns to the Memory mode.
Character type
Group 00
Number "2"
Channel 00
"2m Call" is entered
vi
"NAME" item