Page 1
Part #115057-001 Product Manual: Model #1400P Axial Ventilator (12VDC) IS O 9 0 0 1 Certified T.A. Pelsue Company 2500 South Tejon Street Englewood, Colorado, USA 80110 Tel. 800-525-8460 or 303-936-7432 Fax. 303-934-5581 Internet: www.pelsue.com Email: sales@pelsue.com...
Page 3
Pelsue continues the dedication that industry throughout the world. has made us pre-eminent in this field. Page 3 #115057-001 - Product Manual - Model #1400P Axial Ventilator - Revision 07 - Date: 03-28-2014...
EVERY T.A. PELSUE COMPANY EMPLOYEE IS ExPECTED TO COMMIT TO THIS PHILOSOPHY IN THE PERFORMANCE OF HIS OR HER DAILY TASkS. QUALITY FIRST! T.A. PELSUE COMPANY SENIOR MANAGEMENT TEAM Page 5 #115057-001 - Product Manual - Model #1400P Axial Ventilator - Revision 07 - Date: 03-28-2014...
2.0 - Introduction & Product Information Congratulations on your choice of a Pelsue Model #1400P Axial Ventilator to compliment your confined space ventila- tion operation. The Model #1400P Ventilator is specifically designed to provide a completely portable source of fresh air.
3.0 - Configuration & Assembly Upon initial receipt of the #1400P Axial Ventilator, inspect the packaging for any evidence that the product may have been damaged in shipment. While unpacking the product, inspect all of the components for damage. If damage to any of the components is discovered, Alert the shipping carrier immediately of the damage to the shipment.
Page 9
3.1 Parts Diagram & List (continued) Figure 3.1a: #1400P Parts Diagram Page 9 #115057-001 - Product Manual - Model #1400P Axial Ventilator - Revision 07 - Date: 03-28-2014...
You are responsible for the safe operation of your Pelsue #1400P Axial Ventilator. You must ensure that anyone who will operate or work around the equipment be familiar with confined space ventilation procedures. This manual will take you step-by-step through the workings and capabilities of the #1400P Axial Ventilator and alert you to all good safety and operating practices while using the system.
! CAUTION ! - The user must ensure that the ventilator is located where it cannot fall into water inadvertently and the extension cords or plug connections do not lay in water. Page 11 #115057-001 - Product Manual - Model #1400P Axial Ventilator - Revision 07 - Date: 03-28-2014...
The Pelsue #1400P Axial Ventilator is built from a high density polyethylene housing (HDPE), which has a high resis- tance to chemicals and extreme temperatures, as well as a favorable strength to weight ratio. The Pelsue #1400P Axial Ventilator is specifically designed for confined space applications.
5.2 - Start-Up & Operating Procedures Prior to Operation, the #1400P Axial Ventilator should be configured and prepared according to the following guide- lines. 1. Pre-Operation Inspection: It is necessary to perform a visual inspection, each time, prior to using the product. If deficiencies are found, remove the product from service and contact the T.A.
Page 14
Pelsue Air Flow Alarm (#FLO-CHEk) in order to alert the entrants that positive ventilation is lost. The Axial ventilator can also be used in conjunction with a Pelsue Airpac that connects to the ventilator and has storage built-in for the hose.
Page 16
T.A. Pelsue Company 2500 South Tejon Street, Englewood, Colorado, USA 80110 Toll free 800-525-8460 or 303-936-7432 Fax. 303-934-5581 ISO 90 0 1 Certified Internet: www.pelsue.com Email: sales@pelsue.com...
Need help?
Do you have a question about the 1400P and is the answer not in the manual?
Questions and answers