Motorola PIP1200 Quick Start Manual page 4

3. Wall mount the baby (camera) unit
1
1.
Mark the positions of 2 screw holes on the wall. Drill a screw hole at each marking.
2. Install the supplied wall anchors into 2 screw holes on the wall.
3. Insert the supplied wall mounting screws into the wall anchors.
4. Fix and fasten the underside of the baby (camera) unit and the wall mount
bracket with the supplied separate screw.
5. Hang the wall mount bracket on the wall mounting screws on the wall.
6. Adjust the camera manually if necessary.
Note
The pack includes a power adapter with a longer cord which is beneficial for wall
mount application, where your wall socket is far from the camera.
4. Use your video baby monitor
Parent unit main menu
Adjust LCD brightness
Play lullaby
Set the alarm
Temperature unit °C or °F
selection
4
4
2 3
5
Add camera
+
Delete camera
x
Screen on/off timer
View multiple cameras