Advertisement
Available languages
Available languages
2.
Connect and charge
Baby (camera) unit
WARNING
Strangulation Hazard. Children have STRANGLED in cords. Keep this cord out of the
reach of children (more than 1 meter or 3 feet away). Do not remove the tags from
the AC Adapters. Only use the AC Adapters provided.
Parent unit
A rechargeable battery is already pre-installed inside the parent unit. When fully
charged, you can move the parent unit without losing the link and picture from the
baby (camera) unit. When charging the battery for the first time, charge for at least
16 hours continuously.
1.
Plug the DC plug of the power adapter into the power socket on the side of
the parent unit and plug the other end of the AC adapter into the wall socket.
2. Switch on the AC power and the parent unit will turn on.
3.
When the parent unit is fully charged,
screen display.
4. Press and hold the power button on the top of the parent unit to turn it on
and off.
Note
Use only the supplied power adapter (DC5V / 1000 mA).
Pair the baby (camera) unit to the parent unit
We have paired the baby unit to the parent unit in the pack. In case you want to pair
an extra camera, press and hold
LED blinks.
1. Plug the DC plug of the power adapter into the
power socket on the rear of the baby (camera)
unit and plug the other end of the AC adapter
into the wall socket.
2. The baby unit turns on and the power indicator
lights up in blue.
Press and hold
will appear steadily on the
on the rear of the baby (camera) unit until the
3
Advertisement
