Page 1
ASSEMBLY INSTRUCTIONS ITEM NO: I256-454 Dresser Thank you for purchasing this quality product. Be sure to check all packing material carefully for small parts that may come loose inside the carton during shipment. TOOLS REQUIRED (NOT PROVIDED) PHILLIPS SCREWDRIVER...
Page 2
ASSEMBLY INSTRUCTIONS ITEM NO: I256-454 Dresser STEP 1: Put the case upside down on a soft surface. STEP 2: Each metal leg will come with screw pre-installed with a 1/4" lag as shown below. Adjust as needed to ensure the 1/4" lag. Insert the screw on each metal leg into the buckle plate on the case and push it down to the suitable position.