Ozito PXDDK-215B Instruction Manual
Ozito PXDDK-215B Instruction Manual

Ozito PXDDK-215B Instruction Manual

Compact drill driver kit

Advertisement

Quick Links

COMPACT DRILL
DRIVER KIT
INSTRUCTION MANUAL
SPECIFICATIONS
Input:
18V
Chuck Size:
13mm Single Sleeve
No Load Speed:
0-350 / 0-1,250/min
Torque Setting:
18
Max. Torque:
40Nm
Battery:
18V 1.5Ah Li-Ion
Charge Time:
30min
Weight:
1.1kg
ozito.com.au
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU
MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE
OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND
ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE
WARRANTY POLICY OR PROCEDURE.
WARNING
The following actions will result in the warranty being
void.
• If the tool has been operated on a supply voltage other
than that specified on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
OZITO
Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
WARRANTY
The benefits provided under this warranty are in addition to other rights and
remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to
a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this
warranty, however, where you have suffered any additional direct loss as a result of
a defective product you may be able to claim such expenses by contacting our
customer service helpline above.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty and are excluded from the warranty extension. Warranty excludes
consumable parts.
WHAT'S IN THE BOX
Compact Drill Driver
1.5Ah Battery Pack x 2
Fast Charger
PXDDK-215B
0717

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PXDDK-215B and is the answer not in the manual?

Questions and answers

Summary of Contents for Ozito PXDDK-215B

  • Page 1 Charge Time: 30min Weight: 1.1kg ozito.com.au PXDDK-215B WARRANTY IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU The benefits provided under this warranty are in addition to other rights and remedies which are available to you at law. MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS Our goods come with guarantees that cannot be excluded at law.
  • Page 2: Know Your Product

    RED (Illuminated) Battery is charging (mid charge) GREEN (Illuminated) Battery is fully charged This tool is compatible with all battery and chargers from the Ozito BOTH(Illuminated) Battery pack is too hot or too cold (charging will begin Power X Change Range.
  • Page 3: Battery Installation

    2. BATTERY INSTALLATION Installing the Battery Pack Charging your lithium ion battery - Eco Charger 1 Connect the charger into a mains power outlet. 1 Slide the battery into the drill base until it clicks into place. 2 The charger LED will flash green showing power is being supplied to the charger.
  • Page 4: Operation

    OPERATION 3. KEYLESS CHUCK 4. CONTROLS Forward/ Reverse Lever WARNING: ENSURE THE TOOL IS TURNED OFF & 1 For forward rotation, push the fwd/rev lever towards the left side of the drill. For DISCONNECTED FROM THE POWER SUPPLY BEFORE reverse rotation push fwd/rev lever to the right. PERFORMING ANY OF THE FOLLOWING TASKS.
  • Page 5: Helpful Tips

    This measure will prevent the drill bit from slipping off centre as you start the the drill do all the work. hole. When drilling metals, use light oil on the drill bit to keep it from overheating. The oil will prolong the life of the bit and increase drilling action. PXDDK-215B...
  • Page 6: Troubleshooting

    Blow out the ventilation slots with compressed air periodically . Ensure the battery is properly charged. It will take 4-5 charging cycles before the battery Note: Ozito Industries will not be responsible for any damage or injuries caused by reaches optimum charge and run time.
  • Page 7: Spare Parts

    For further information, or any parts not listed here, using the battery pack. This charger is not intended for any uses other than charging rechargeable batteries. Any other use may result in risk of visit www.ozito.com.au or contact Ozito Customer fire, electric shock or electrocution. Service: Do not place any object on top of the charger or place the charger on a soft surface that may result in excessive internal heat.
  • Page 8: Electrical Safety

    The power supply for this products charger should be protected by a residual current device (rated at 30mA or less). A residual current Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand.

Table of Contents