Advertisement
Available languages
Available languages
Notes:
After 30 seconds without pressing any button, the clock switches automatically from Set Mode to
Normal Time Mode.
Setting the daily alarms:
This clock possesses 1 daily alarm. To view the set alarm time, under the clock mode, press the
"ALARM" button, LCD display the "
To activate or deactivate the daily alarms, briefly press the "ALARM" button once.
Press and hold down the "ALARM" button for 2 seconds until alarm time flashing icon is displayed.
The hour display of the Alarm time starts to flash. Use the "▲" and "▼"buttons to set the required
hour. Press the "ALARM" button to confirm your setting
The minute display of the Alarm time starts to flash. Use the "▲" and "▼"buttons to set the required
minute. Press the "ALARM" button to confirm your setting and to end the setting procedure.
While the alarm is sounding, press any button except the "SNOOZE" button to stop the alarm
sound. The alarm will be repeated automatically on the next day at the same time .
Notes:
After 30 seconds without pressing any button the clock switches automatically from setting mode to
Normal clock mode.
The alarm will sound for 2 minutes if you do not deactivate it by pressing any button. In this case
the alarm will be repeated automatically after 24 hours.
Rising alarm sound (crescendo, duration: 2 minutes) changes the volume 4 times whilst the alarm
signal is heard.
°C/°F temperature display:
The temperature is displayed either in °C or °F. Pressing the "▼" button allows you to switch
between the individual models.
Snooze function:
Proceed as follows to activate the snooze function: While the alarm is sounding, press the
"SNOOZE" button to activate snooze function. The snooze function is active and the "
appears on the display.
This operation moves the alarm by 5 minutes and the alarm will restart at this time.
The Snooze function can be interrupted by pressing any button.
Trouble shooting
If your clock displays irrelevant time or does not function properly, which maybe caused by electro-
static discharge or other interference, slide open the battery cover, take out the batteries and reinstall
them by observing the correct +/- polarity. Your unit will be reset to default settings and you need to
set it again.
Precautions
This main unit is intended to be used only indoors.
Do not subject the unit to excessive force or shock.
Do not expose the unit to extreme temperatures, direct sunlight, dust or humidity.
Do not immerse in water.
Avoid contact with any corrosive materials.
Do not dispose this unit in a fire as it may explode.
Do not open the inner back case or tamper with any components of this unit.
" icon.
EN3
" icon
Advertisement
