Advertisement
Available languages
Available languages
Part B – Buttons and Framework
B1: "SET" button
B3: "UP" button ( ▲)
B5: "SNOOZE" button
B7: Stand
Initial operation:
Open the clock battery compartment cover
Insert 2 x AA batteries observing correct polarity [ "+" and "-" marks]
When you insert the batteries, all the icon on the LCD display will briefly light up for 3 seconds, you
will hear a beep tone and the clock is powered
Manual time setting:
Press and hold down the "SET" button for 2 seconds, the 12/24 hour mode display starts to flash.
Press the "▲" or "▼"button to set the correct 12/24 hour mode.
Press the "SET" button to confirm your setting, the hour display starts to flash. Press the "▲" or
"▼"button to set the correct hour.
Press the "SET" button to confirm your setting, the minute displays starts to flash. Press the "▲" or
"▼"button to set the correct minute.
Press the "SET" button to confirm your setting, the year display 2009 starts to flash. Press the "▲"
or "▼"button to set the correct year.
Press the "SET" button to confirm your setting, the month display starts to flash. Press the "▲" or
"▼"button to set the correct month.
Press the "SET" button to confirm your setting, the date display starts to flash. Press the "▲" or
"▼"button to set the correct date.
Press the "SET" button to confirm your setting, the language display starts to flash. Press the "▲"
or "▼"button to set the correct weekday language.
Press the "SET" button to confirm your setting and to end the setting procedures, enter the clock
mode.
B2: "ALARM" button
B4: "DOWN" button (▼)
B6: Battery compartment
EN2
Advertisement
