General Information - Chamberlain GAROG DK Series Operating Manual

Live and moving parts of electrical
machines can cause serious or fatal
injuries. The installation, connection
and starting up, as well as main-
tenance and repair work may only be
carried out by qualified specialist
personnel.
Please find the technical data for the geared motor
from the type plate or from the attached documents.
In doing so you should also follow:
· The instructions in this manual
· All other project planning documents for the drive
· The start-up instructions and circuit diagrams
· The currently-valid national regulations (safety and accident prevention)
Guarantee, storage
It is essential to follow these instructions and advice since they are the basis for trouble-free operation as well as for any
guarantee claims. Check the delivery immediately after receipt for any transport damage. Report any damage immediately
to the transport company as well as to the supplier. If you do not install the geared motor straight away you should store it in
a dry, dust-free, low-vibration room at temperatures between 0 and +40°C.
Zustand bei Auslieferung
Delivered condition
Every geared motor is manufactured according to the valid technical documentation and subjected to a test run at
Chamberlain. We retain the right to make changes to technical data and design, which are in the interests of progress.
Dispatch takes place in the appropriate packaging.
If you still have questions on the installation then please contact:
IMPORTANT SAFETY INFORMATION

GENERAL INFORMATION

We thank you for purchasing our product.
To avoid damage to the door or the
drive, all the locking devices must be
put out of operation. Set locking
device(s) to the "Open" position. If a
lock is to remain in operation an
unlatching switch must be installed.
Chamberlain GmbH, Alfred-Nobel-Str. 4,
66793 Saarwellingen Germany
Tel: (0049)(0)6838-907222
Fax: (0049)(0)6838-907179
e-mail: info@garog-service.de
Internet: www.garog-service.de
4