Circuit Diagram Sts1 - Chamberlain GAROG DK Series Operating Manual

Redundant safety devices are self-monitoring, i.e. they can detect an error within the
circuit and in the device connections.
This type of circuit requires the use of self-monitoring sensing equipment.
Garog DK series door drive
with STS1 controller
VOLTAGE
INCORRECT
VOLTAGE
DESTROYS
THE TRANS-
SELECTION SWITCH
FORMER
Before switching over
read operating manual
Triple button with LED
UP
STOP
DOWN
Door contact or slack rope switch
Connection example 4: Self-latching
STS1 with triple button, door contact and 3-channel remote controller
Caution: Earth should be connected to motor housing
Caution: Switching over to 230V may only be
carried out in the case of 3 x 230V applications.
CIRCUIT DIAGRAM - STS1
Jumper J1 bridged over =
Self-latching upward travel
11
Ch. A B C
STOP
UP DOWN
CFU3 - 3 Channel wireless control
Switching strip with NC contact