Advertisement
Quick Links
Round Table
TOP LEG
x1
BASE LEG
x1
ROUND
TABLE TOP
x1
HAND SCREW
x4
WASHER
SPACER
x2
x1
BOLT
NUT
x1
x1
REQUIRED TOOLS
(Included)
17MM WRENCH
x1
5MM ALLEN KEY
x1
2 People
Required
1
Place the spacer on top of the base leg crossbar, and make
sure it drops into place. Then, place the top leg on the spacer,
lining up the holes. Line up the bolt, washers, and nut in order
to sandwich the legs and hold everything in place. Using the
wrench to hold the nut still, turn the bolt with the Allen Key
until tightly fastened.
NOTE: The base leg has a lower crossbar than the top leg.
Holds up to
300 lb (136 kg)
Advertisement
Related Manuals for Vari Round Table
Summary of Contents for Vari Round Table
- Page 1 Round Table 2 People Holds up to Required 300 lb (136 kg) ROUND TABLE TOP HAND SCREW WASHER SPACER TOP LEG BOLT REQUIRED TOOLS (Included) Place the spacer on top of the base leg crossbar, and make 17MM WRENCH sure it drops into place. Then, place the top leg on the spacer, lining up the holes.
- Page 2 Flip the assembled legs over, aligning the holes in the frame with the pre-drilled connection points on the underside of the Adjust the footpads to level the table as needed. table top. (800) 207-2587 Patent and trademark information: vari.com/patents | ©2022 Varidesk, LLC. All rights reserved.