Ä Installing The Vocal Designer Model Expansion; Uninstalling A Model Expansion - Roland Vocal Designer User Manual

Using the Vocal Designer Model Expansion
Installing the Vocal Designer Model Expansion
Saving Files To a USB Flash Drive
* When using a USB flash drive for the first time, you must format it
on the JUNO-X.
Ø "Formatting a USB Flash Drive" (Startup Guide)
1 .
Connect the USB flash drive to your computer.
2 .
Save the file (EXM006_VocDsgnr.exz) to the root
directory of the USB flash drive.
3 .
Disconnect the USB flash drive from your computer.
Installing on the JUNO-X
1 .
Insert the USB flash drive you prepared in "Saving
Files To a USB Flash Drive" into the JUNO-X.
2 .
Turn the power of the JUNO-X on while holding
down the [ENTER] (INIT) button.
The EXPANSION top screen appears.
List of installed Model Expansions
Uninstall Install
([ Í ] button)
([Ë] button)
Press the [ Ë ] button to go to the installation screen.
3 .
Use the [ Ç SELECT É ] knob to select "EXM006_
4 .
VocDsgnr", and press the [ENTER] (INIT) button or
the [ Ë ] button.
A confirmation message appears.
If you decide to cancel, press the [EXIT] button.
MEMO
The user license registration screen appears if you're installing for
the first time.
To continue installing, use the [ Ë ] button to select "OK", and then
press the [ENTER] (INIT) button.
5 .
To execute, use the [- VALUE +] knob to select "OK",
and then press the [ENTER] (INIT) button.
6 .
Turn the power off, then on again.
This allows you to use the Vocal Designer Model Expansion.
4
Memory used
EMPTY:
A new file can be installed.
FULL:
A new file cannot be installed.
You must free up some memory
for installation.
Ø "Uninstalling a Model Expansion" (p. 4)
Error Messages
Indication Action
There is not enough memory available for installation.
Expansion Memory Full! Follow the steps in "Uninstalling a Model Expansion" to
free up the memory.
The Vocal Designer Model Expansion is currently linked
Incorrect License! Please
to a different user license.
Remove License Follow the steps in "Initializing Your User License"
(p. 5) to initialize the user license.

Uninstalling a Model Expansion

If there is not enough free memory, you can uninstall Model
Expansions that are already installed, and then install the
Vocal Designer Model Expansion.
1 .
Hold down the [ENTER] (INIT) button and turn the
JUNO-X on.
The EXPANSION top screen appears.
Use the [ Ç SELECT É ] knob to select the file to
2 .
uninstall, and then press the [ Í ] button to go to the
uninstallation screen.
A confirmation message appears.
If you decide to cancel, press the [EXIT] button.
3 .
To execute, use the [- VALUE +] knob to select "OK",
and then press the [ENTER] (INIT) button.
MEMO
The uninstall process works the same even if you've installed the
Model Expansion with Roland Cloud Connect (WC-1).