Maintenance - DeWalt DCR028B Instruction Manual

English
read "Connected". If connection does not occur and you are
unable to stream music please follow the instructions for
Pairing Radio with a Bluetooth® Audio Device.
Timeout Functionality (Fig. A)
To conserve battery life the radio is designed to power off
automatically after an hour of inactivity. This inactivity could
be due to the device being unpaired for an hour or in the
case of the Bluetooth® connection being broken for the
same period of time. If the radio powers off due to inactivity
of any kind refer to Connecting a Previously Paired
Bluetooth® Audio Device.
nOTE: Optimum Bluetooth® streaming range is roughly
30 ft (9 m) (line of sight) to the radio but distances up
to 100 feet (30 m) are possible. Physical obstacles, other
wireless devices or electromagnetic devices may affect the
connection quality.
If Bluetooth® connection is lost due to exceeding time of
separation, exceeding the optimum distance, obstacles or
otherwise, reconnecting your device with the radio may
be necessary.
Charging a Cell Phone or Audio Device Via
USB (Fig. E)
Your audio device or mobile phone can be charged (up to
2 AMPS) using the USB charging port
charging is possible when unit is on, running off of AC plug
power or the battery pack.
Important Radio Notes
1. Reception will vary depending on location and strength
of radio signal.
2. Running the radio while connected to certain
generators may cause background noise.
3. AM reception will most likely be clearer when powered
by a battery pack.

MAINTENANCE


WARNING: To reduce the risk of serious personal
injury, turn unit off and remove the battery
pack or AC power cord before making any
adjustments or removing/installing attachments
or accessories. An accidental start-up can
cause injury.
Your D WALT power tool has been designed to operate
e
over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper
tool care and regular cleaning.
Cleaning

WARNING: Blow dirt and dust out of all air vents with
clean, dry air at least once a week. To minimize the risk
of eye injury, always wear ANSI Z87.1 approved eye
protection when performing this procedure.

WARNING: Never use solvents or other harsh
chemicals for cleaning the non-metallic parts of
the tool. These chemicals may weaken the plastic
materials used in these parts. Use a dry cloth to clean.
8
Accessories

Recommended accessories for use with your tool
are available at extra cost from your local dealer or
authorized service center. If you need assistance in
locating any accessory, please contact D
Tool Co., 701 East Joppa Road, Towson, MD 21286, call
1-800-4-D
www.dewalt.com.
Repairs
The charger and battery pack are not serviceable.

11 on the radio. This
Register Online
Thank you for your purchase. Register your product now for:
•
•
•
Register online at www.dewalt.com/register.
Three Year Limited Warranty
D
e
faulty materials or workmanship for three years from
the date of purchase. This warranty does not cover part
failure due to normal wear or tool abuse. For further detail
of warranty coverage and warranty repair information,
visit www.dewalt.com or call 1-800-4-D
433-9258). This warranty does not apply to accessories
or damage caused where repairs have been made
or attempted by others. THIS LIMITED WARRANTY IS
GIVEN IN LIEU OF ALL OTHERS, INCLUDING THE IMPLIED
WARRANTY OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, AND EXCLUDES ALL INCIDENTAL
OR CONSEQUENTIAL DAMAGES. Some states do not allow
limitations on how long an implied warranty lasts or the
exclusion or limitation of incidental or consequential
damages, so these limitations may not apply to you. This
Never let any liquid get inside the tool; never immerse
any part of the tool into a liquid.
WARNING: Since accessories, other than those
offered by D WALT, have not been tested with this
e
product, use of such accessories with this tool could be
hazardous. To reduce the risk of injury, only D
recommended accessories should be used with
this product.
WALT (1-800-433-9258) or visit our website:
e
WARNING: To assure product SAFETY and
RELIABILITY, repairs, maintenance and adjustment
(including brush inspection and replacement, when
applicable) should be performed by a D
service center or a D WALT authorized service center.
e
Always use identical replacement parts.
WARRAnTY sERViCE: Registering your product will
help you obtain more efficient warranty service in case
there is a problem with your product.
COnFiRMATiOn OF OWnERshiP: In case of
an insurance loss, such as fire, flood or theft, your
registration of ownership will serve as your proof
of purchase.
FOR YOUR sAFETY: Registering your product will
allow us to contact you in the unlikely event a safety
notification is required under the Federal Consumer
Safety Act.
WALT will repair, without charge, any defects due to
WALT
e
WALT Industrial
e
WALT factory
e
WALT (1-800-
e