Toshiba 43VJ33 Series Owner's Manual page 18

Q
Q
Why is there a picture but no sound?
A
Check the volume has not been turned down or
that sound mute has not been selected.
Q
What else can cause a poor picture?
A
Interference or a weak signal. Try a different TV
station. Manual fine tuning may help.
Select the Manual tuning menu. Highlight the
1
station and press OK, then press R to select
Manual fine tuning.
Using P or Q adjust to get the best picture and
2
sound. Press OK and then EXIT.
Manual tuning
Manual fine tuning
1 I A
OK : To store
MENU : To return
EXIT : To exit
Q
Why is the video/DVD in black and white?
A
Check the correct input has been chosen,
S-VIDEO or AV. See AV connections.
Q
Why doesn't the remote control work?
A
Check the side switch on the remote control is in
TV mode.
Check the batteries aren't dead or inserted incorrectly.
Q
Why don't the controls on the side/front of the
TV work?
A
Check that Panel lock is not ON.
Q
Why is there a message permanently on the
screen?
A
Remove it by pressing CALL.
uestions
and
22 + 2 BBC1
M
A
nswers
Q
Why has the screen turned blue?
A
Blue screen in the Feature menu is ON. When
no signal is being received, the TV will turn off the
sound and switch the TV screen to blue. After 15 minutes
the TV will switch to Standby mode.
Q
Why are there problems with teletext?
A
Good performance of text depends on a good
strong broadcast signal. This normally requires a
roof or loft aerial. If the Text is unreadable or garbled,
check the aerial. Go to the main index page of the teletext
service and look for the User Guide. This will explain the
basic operation of teletext in some detail. If further
information is needed on how to use text see the teletext
section.
Q
Why are the colours wrong when an NTSC
source is played?
A
Connect the source via a Scart lead and play.
Select the Manual tuning menu.
Manual tuning
Colour : AUTO
1
Set the Colour to AUTO and exit.
1
Go to the Picture menu and adjust the tint.
2
18
continued
I A 22 + 2 BBC1
M