Advertisement
3. Remove the recovery disc.
4. Turn off the power.
9.10.4.2. UPDATING FIRMWARE
1. Load the recovery disc RFKZD03R005
on to the player and run it.
2. Firmware version of the player is automatically checked.
Appropriate message appears whenever necessary.
3. Using remote controllers cursor key,
select whether version updating is to be done or not
(Selection of Yes/No).
4. a. If Yes is selected, version updating is performed.
b. If No is selected, only recovery is performed.
5. a. When updating is finished, remove the disc
according to the message appearing on the screen.
b. Remove the disc according to the message
appearing on the screen.
6. Turn off the power.
9.11. VCR SELF-DIAGNOSIS RESULT DISPLAY
The "SELF-DIAGNOSIS RESULT DISPLAY & MEMORY
function is built in this VTR.
It means that when the VCR detects undesirable condition,
it can be displayed a "Error code (Two numbers from the right)" with Service Mode 2.
Since the "Error code" is stored in the EEPROM,
it can be displayed although after disconnected the AC leads.
It can be displayed with Service Mode 2.
(If a second error had been detected,
only the most recent error is displayed.)
For more details, refer to the Service Manual
for R4 Mechanism Chassis for EURO model
(MAD0403002C2).
9.12. CAUTION FOR AC MAINS LEAD (NV-VP33EB/EBL)
10. ASSEMBLING AND / DISASSEMBLING / THE
MECHANISM UNIT
10.1. DISASSEMBLY PROCEDURE
37
Advertisement
