Advertisement
9.7.2. SERVO PROCESS DISPLAY
1. Operation/display
While the player is in STOP mode, perform the specified key
operation to display the servo process number on FL.
When the display does not change from the error
indication, press Open/Close key to show
the servo process number.
Key operation: In STOP mode,
main unit PAUSE+FWD- SKIP+ remote controller [7]
9.8. SALES DEMONSTRATION LOCK FUNCTION
This function prevents discs from being lost
when the unit is used for sales demonstrations
by disabling the disc eject function.
"LOCK" is displayed on the unit and
ordinary operation is disabled.
9.8.1. SETTING
The sales demonstration lock is set by simultaneously pressing STOP button on the player and
POWER button on the remote control unit.
9.8.2. CANCELLATION
The lock can be cancelled by the same procedure as used
in setting. ("UNLOCK" is displayed on cancellation.
Disconnecting the power cable from power outlet does
not cancel the lock.)
9.9. HANDLING AFTER COMPLETING REPAIRS
Use the following procedure after completing repairs.
9.9.1. PRECAUTIONS
Do not disconnect the power plug from the outlet with the tray still open, then close the tray
manually.
9.9.2. METHOD
Confirm that the power is turned on:
1. Press the "OPEN/CLOSE" button to close the tray.
2. Press the "POWER" button to turn off the power.
Number to the left ...
... Process number when
halted
Number to the right ...
... Process number in
progress
35
Advertisement
