3. Scan this bar code label to exit Accumulate mode and enter the data record.
Enter Accumulate Mode
Purpose:
Enters Accumulate mode. You can accumulate data from a series of bar code labels and
enter them as a single label.
From COM Port:
Not supported
Scan:
Enter Accumulate Mode
*+/*
*+/*
Backspace
Purpose:
Deletes the last character from the current data record being accumulated. If there is no
data in the buffer, the command has no effect.
From COM Port:
Not supported
Scan:
Backspace
*-+*
*-+*
Clear
Purpose:
Deletes the entire data record you are accumulating. If there is no data in the buffer, the
command has no effect.
From COM Port:
Not supported
Scan:
Clear
*--*
*- -*
C
Nugg
Exit Accumulate Mode
*-/*
*-/*
39
Reader Command Reference
6
6-5