Advertisement
Quick Links
QIKDOC Connect Clamp Fix instructions
CLAMP FIX (IN SURFACE)
1
Cutout Size
For surfaces 12mm (0.47") - 39mm (1.54") thick
Required clearance
Align clamp brackets with QIKDOC and
3
screw into place using screws provided
(a T10 Torx bit is required)
Align QIKPAC CARRY with QIKDOC, slide the heel side of the QIKPAC
5
CARRY into QIKDOC first and rotate down until click is heard
UK -
sales@oeelectrics.co.uk / +44 (0) 1924 367 255
AUS -
sales@oeelsafe.com.au / 1300 ELSAFE (357 233)
(14.37")
385.00mm
(15.16")
365.00mm
(14.37")
385.00mm
(15.16")
R12.00mm
(0.47")
2
QIKPAC CARRY FLUSH WITH FRONT EDGE
MAX
R12.00mm
(0.47")
4
Rear View
DE -
U.S.A -
INSTR1292
386.70mm
(15.22")
SCREW FIX (UNDER SURFACE)
398.70mm
Fit QIKDOC into surface
(15.70")
FRONT EDGE
OF SURFACE
386.70mm
(15.22")
398.70mm
(15.70")
385.00mm
(15.16")
Tighten bolts
385.00mm
(15.16")
CAUTION Do not overtighten
info@oeelectrics.de / +49 (0)2261 958 3001
sales@oeelectrics.com / +1 (844)-927-0600
386.70mm
(15.22")
www.oeelectrics.com
QIKDOC FLUSH WITH FRONT E
386.70mm
(15.22")
CABLE
CABLE
1
M
1
M
Advertisement
Related Manuals for OE electrics INSTR1292
Summary of Contents for OE electrics INSTR1292
- Page 1 (14.37”) R12.00mm (0.47”) INSTR1292 386.70mm 386.70mm (15.22”) (15.22”) www.oeelectrics.com QIKDOC Connect Clamp Fix instructions 385.00mm (15.16”) CLAMP FIX (IN SURFACE) SCREW FIX (UNDER SURFACE) 398.70mm Cutout Size Fit QIKDOC into surface (15.70”) QIKPAC CARRY FLUSH WITH FRONT EDGE QIKDOC FLUSH WITH FRONT E FRONT EDGE 365.00mm...
- Page 2 INSTR1292 www.oeelectrics.com QIKDOC Connect Clamp Fix instructions Removing QIKPAC CARRY from QIKDOC Pull thumb release (highlighted Lift QIKPAC CARRY from QIKDOC orange) to release QIKPAC CARRY Connect GST08 cable(s) to underside of QIKDOC (where applicable*) Align plug with QIKDOC as shown, ensure text is facing outward on GST08 cable prior to insertion as shown.
- Page 3 INSTR1292 www.oeelectrics.com QIKDOC Connect Clamp Fix instructions Cable tie GST08 cable(s) into place Slide cable tie through slot Fold cable tie over cable Tighten cable tie & remove excess UK - DE - info@oeelectrics.de / +49 (0)2261 958 3001 sales@oeelectrics.co.uk / +44 (0) 1924 367 255 AUS - sales@oeelsafe.com.au / 1300 ELSAFE (357 233)