OE electrics INSTR1303 Quick Start Manual

QIKPAC M4F (Docking)Connecting Shoe
Panel installation instructions
NOTE: M4F Connecting Shoe is used for Appliance Powering
1
Cutout Dimensions
Align Connecting Shoe with
2
cutout and snap into place
4
Power inputs and outputs
Rear
View
Power
Output
Power
Output
*SIT STAND MECHANISM CAN BE CONNECTED TO EITHER END OF THE QIKDOC,
BUT THE SECOND OUTPUT AT THE SAME END OF THE QIKDOC SHOULD NOT
THEN BE USED (OTHERWISE BATTERY OVERLOAD AND SHUTDOWN MAY OCCUR)
UK -
sales@oeelectrics.co.uk / +44 (0) 1924 367 255
AUS - sales@oeelsafe.com.au / 1300 ELSAFE (357 233)
CUTOUT FOR SINGLE QIKPAC CONNECTING SHOE
Single Connecting Shoe
CUTOUT SUITABLE FOR
1-3mm METAL PANEL
238.50
(9.39")
238.50
(9.39")
COMBINED OUTPUT
RATING 144W MAX
INSTR1303
236.50
(9.31")
Connect GST08 interconnecting cable to
appropriate connector on underside of
3
connecting shoe with writing on the cable
facing up
COMBINED OUTPUT
RATING 144W MAX
DE - info@oeelectrics.de / +49 (0)2261 958 3001
U.S.A -
sales@oeelectrics.com / +1 (844)-927-0600
www.oeelectrics.com
Cables should
slot into place
easily. Do not
force
Power
Output
Power
Input
Power
Output