Advertisement
QIKDOC Locate Clamp Fix instructions
1
CLAMP FIX (IN SURFACE)
Cutout Size
Required clearance
Align clamp brackets with QIKDOC and screw into
3
place using screws provided (a T10 Torx bit is required)
4
Tighten bolts
CAUTION Do not overtighten
UK -
sales@oeelectrics.co.uk / +44 (0) 1924 367 255
AUS -
sales@oeelsafe.com.au / 1300 ELSAFE (357 233)
365.00mm
(14.37")
365.00mm
(14.37")
385.00mm
(15.16")
Rear View
Rear View
R12.00mm
(0.47")
2
Fit QIKDOC into surface
QIKPAC CARRY FLUSH WITH FRONT EDGE
MAX
R12.00mm
(0.47")
DE -
U.S.A -
FRONT EDGE
OF SURFACE
INSTR1294
www.oeelectrics.com
386.70mm
(15.22")
398.70mm
(15.70")
SCREW FIX (UNDER SURFACE)
FRONT EDGE
OF SURFACE
386.70mm
(15.22")
398.70mm
(15.70")
385.00mm
(15.16")
385.00mm
(15.16")
info@oeelectrics.de / +49 (0)2261 958 3001
sales@oeelectrics.com / +1 (844)-927-0600
QIKDOC FLUSH WITH FR
386.70mm
(15.22")
Advertisement
Table of Contents
Related Manuals for OE electrics INSTR1294
Summary of Contents for OE electrics INSTR1294
- Page 1 FRONT EDGE 365.00mm OF SURFACE INSTR1294 (14.37”) R12.00mm (0.47”) www.oeelectrics.com QIKDOC Locate Clamp Fix instructions 386.70mm (15.22”) 398.70mm (15.70”) CLAMP FIX (IN SURFACE) SCREW FIX (UNDER SURFACE) Cutout Size Fit QIKDOC into surface QIKPAC CARRY FLUSH WITH FRONT EDGE QIKDOC FLUSH WITH FR...
- Page 2 INSTR1294 www.oeelectrics.com QIKDOC Locate Clamp Fix instructions Align QIKPAC CARRY with QIKDOC, slide the heel side of the QIKPAC CARRY into QIKDOC first and rotate down until click is heard Removing QIKPAC CARRY from QIKDOC Pull thumb release (highlighted Lift QIKPAC CARRY from QIKDOC...
Need help?
Do you have a question about the INSTR1294 and is the answer not in the manual?
Questions and answers