Genie LA 200 Operating Instruction page 12

Clearing a blockage of the film
1. This machine is equipped with a film blockage function in order to resolve any
blockage of the film. Such function is featured by ABS button on BACK SIDE
of the laminator.
2. Please switch off the machine immediately by setting the switch to '"O"' and
pull out the plug from the mains socket outlet, let the machine to cool down
briefly (for hot laminating) and push the 'ABS' anti-film blockage button on
back whenever there is a blockage of the film.
3. Hold the ABS switch firmly with one hand and pull out the film completely from
the machine's feed opening or delivery opening with the other hand.
4. After you have resolved the blockage of the film and released the ABS switch,
this will go back to its starting position again. Now you can use the machine
again completely.
5. Please contact our service hot line if there is a blockage of the film again.
Trimmer
1. Set the trimmer down on a level, stable working base.
2. Slide the cutting head to one side of the guide rail
3. Place the material to be cut under the guide rail and press the rail downwards.
Use the visual positioning aids on the trimmer to help produce a clean cut.
4. Draw the cutting head along the guide rail to the other side of the trimmer.
5. Remove the material cut.
Corner Cutter
1. Set the corner cutter down on a level, stable working base.
2. Lay a corner of the material to be cut in the opening of the corner cutter.
3. Press the top half of the corner cutter down.
4. Remove the material cut.
12