Advertisement
+
PRESS
FIBER
BOX
X6
fig.3 - configuration in Companion mode
Note :
The SSID on the back of the Wi-Fi Box Extender is not used
in this configuration. Use the SSID on the back of the
FIBER BOX X6.
WIFI BOX
SSID
Internet box
fig.4 - configuration in autonomous mode
06
FIBER BOX X6
SSID
PRESS
2sec.
FIBER BOX X6
SSID
WIFI BOX
SSID
PRESS
PRESS
2sec.
2sec.
Connecting your devices to their new Wi-Fi network
You can connect your devices to your Wi-Fi Box via cable
or Wi-Fi.
• Wired connection
Connect the Ethernet cable with one of the Ethernet ports
on the Wi-Fi Box Extender and your modem.
• Wireless connection (FIBER BOX X6)
If you are using a FIBER BOX X6, your device should
automatically connect to your Wi-Fi Box, if it was
Previously paired with your Fiber Box X6.
If not, use the Wi-Fi network name (SSID) and password
displayed under your FIBER BOX X6.
If you changed the FIBER BOX X6 SSID or password using
the administrator console (GUI), you will need to use the
new ones.
• Wireless connection (other modem)
Select the Wi-Fi network name (SSID) and password,
displayed under your primary Wi-Fi Box
Note :
If you want to reconfigure your Wi-Fi Box in autonomous mode
configuration you can access the administrator console by entering
http://wifi.box
in a browser. You need to use the login "admin" and
the password displayed under the primary Wi-Fi Box.
07
Advertisement
