Advertisement
Quick Links
Advertisement
Summary of Contents for Salt. Wi-Fi Box
- Page 1 Installing your WiFi Box...
-
Page 2: Installation
• Plug the power adaptor into the power socket and plug the cable in to the power port of the Wi-Fi Box • Turn the Wi-Fi Box on If you are setting up more than one Wi-Fi Box simply repeat these steps for each Box. fig.2 - installation... - Page 3 • Press the WPS button on the FIBER BOX X6 (+ button) repeat step 1 Installation and repeat the process. 2 sec, then press the WPS button of the Wi-Fi Box for 2 The Wi-Fi LED will start blinking white and (fig.
- Page 4 Note : displayed under your FIBER BOX X6. The SSID on the back of the Wi-Fi Box Extender is not used in this configuration. Use the SSID on the back of the If you changed the FIBER BOX X6 SSID or password using FIBER BOX X6.
-
Page 5: Troubleshooting
Poor connection to the modem Blinking red The connection to the modem was lost In case you want to reset your Wi-Fi Box to the factory Wi-Fi activated White settings, press the Reset button on the back of the box with... - Page 6 WiFi Box...