Download Print this page

HP ProLiant ML530 Quickspecs page 6

Generation 2
Hide thumbs Also See for ProLiant ML530:

Advertisement

QuickSpecs
Standard Features
Industry Standard
Compliance
Availability
Intelligent Manageability
ACPI 1.0b Compliant
PCI 2. 2 Compliant
PCI-X 1.0 Compliant
WOL Support
Microsoft® Logo certifications
Novell certified
Advanced Memory Protection Technology – delivers unsurpassed memory protection and server availability:
Advanced ECC Memory
ECC protection provides the ability to detect and correct single bit memory errors while Advanced ECC
extends this coverage to include protection against multiple simultaneous errors on a DIMM. Advanced ECC
detects and corrects 4bit memory errors that occur within a single DRAM chip on a DIMM. Advanced ECC
algorithms work in combination with industry standard ECC DIMMS.
Advanced Memory Protection Configurations
Online Spare Memory
Offers a higher level of memory protection than Advanced ECC alone. The system is configured with a spare
bank of memory. If the number of single-bit correctable errors on a bank exceeds the pre-defined error
threshold, the failing bank will fail over to the Online Spare bank without intervention or server interruption.
The failed memory can then be replaced at the user's convenience during a scheduled maintenance window.
Single-Board Mirrored Memory
Single-board mirrored memory provides a higher level of availability than Advanced ECC and Online Spare
Memory because it protects against multi-bit errors. Single-board Mirrored Memory uses a single memory
board that is configured with a mirrored/redundant set of memory. The system writes to both sets of memory,
but reads from one. If a memory bank has a multi-bit error or full DIMM failure, the system simply reads from
the mirrored bank instead. This process occurs without intervention or server interruption, and the failed
DIMM can be replaced during a regularly scheduled shutdown.
NOTE: All Advanced Memory Protection modes are configured in the ROM-Based Setup Utility (RBSU) and viewable
through Insight Manager 7 (CIM 7) and the Integrated Management Log (IML).
PCI-X Hot Plug Technology (Four 64bit/100MHz PCI-X hot plug slots available)
One 600W Hot Plug Power Supply standard
Two Hot Plug System Fans standard
Insight Manager 7
HP Systems Insight Manager
Redundant ROM
Remote Flash ROM Utility
Remote Lights-Out Edition (optional)
Automatic Server Recovery-2 (ASR-2)
Integrated Management Log
Server Health Logging
Drive Parameter Tracking (with Smart Array Controller)
Dynamic Sector Repairing (with Smart Array Controller)
Pre-Failure Warranty (covers processors, hard drives and memory)
DA - 11359 Worldwide — Version 48 — September 24, 2004
HP ProLiant ML530 Generation 2 (G2)
Page 6

Advertisement

loading