Malibu Boats WF511 General Instructions

GENERAL INSTRUCTIONS FOR FIBER OPTIC LED WATERFALL
1. Unpack the product, wipe off dust with a damp cloth. Take out all
accessories: A bag of small stones, pump and adapter assembly.
2. Familiarize yourself with the pump. The switch located at the front of
it controls the water flow. The flow is indicated by a max and min sign.
To increase flow, move switch in the direction of max. To decrease flow,
move the switch toward min.
FEATURES:
Unique water design-illuminated streams of water create a unique
visual display.
Special effects lighting illuminates fountain in red, blue and green for
a more dramatic effect.
A few white bright fiber optic set on the background has a twinkling star
effect to remind you of a tranquil sky in the evening while water is
still falling.
The soothing sound of illuminated streams of water can make you feel
everything is silent except the sound of water.
Improve concentration by masking distractions so you can stay focused.
Innovative, artistic design enhances the environment at home or at work.
Durable electrical water pump can be operated from any indoor
electrical outlet.
CAUTION: This pump has been evaluated for use with water only.
NOTE: It is recommended the pump be set at its highest
flow during assembly and later adjusted to a lower setting
if desired. Be sure to unplug pump before adjusting flow
setting.
WARNING: RISK OF ELECTRICAL SHOCK
• Do not connect to any voltage other than that shown on the pump.
• This pump is supplied with a grounding conductor and grounding-type
attachment plug. To reduce the risk of electric shock, be certain that it is connected only to a properly grounded,
grounding-type receptacle.
• The national electric code requires that a ground fault circuit interrupter (GFCI) be used in the branch circuit
supplying fountain pumps and other pond equipment. See your electrical supplies dealer for this device.
• If the supply cable is damaged it can not be replaced and the pump unit should be discarded.
WARNING: RISK OF FIRE
• Do not use with water above 30˚C.
• Do not pump flammable liquids.
3. Lead the cord through the cord slot on the bottom of the base. This will ensure that the unit is balanced when placed
on a flat surface. Attach the pump to the connector tube on the Waterfall and attach the AC adapter jack to the base
power cord. DO NOT plug into outlet at this time.
NOTE: Do not let pump run when NOT submerged in water. Doing so may damage the pump. Always submerge
the pump in water first, and then plug in the unit.
4. Fill base with distilled water to approximately 1/2" above pump. Use distilled water only. Tap water will create mineral
deposits that will result in the corruption of the Waterfall and pump.
5. Place the top of Waterfall on base properly.
6. Plug adapter into 120V household outlet.
WARNING: This is not a toy. To avoid danger of choking keep small stones away from Children and Pets.
The product is designed for indoor use only. Do not use outdoors.
NOTE: Ensure that the electrical cord loop is below the electrical outlet." This will prevent water from running
down the cord into the electrical outlet.
WF511