Page 1
MyAir3 as MASTER Panasonic A/C Unit Cheat Sheet REQUIRED FIELD SETTINGS: MENU #1 - Set remote control as master: 01 = 0001 MENU #1 - Sense temp from remote control: OA = 0001 MENU #2 - Use only remote control sensor: 32 = 0001...
Page 2
MyDict - MyAir3 as Master with Panasonic A/C 2013 Panasonic Unit 1. Install the Panasonic indoor and outdoor unit according to Panasonic’s instructions. Do not connect any MyAir electronics. 2. Connect up the Panasonic wall controller in the roof space, there is no need to run the controller down the wall as it will be only be used to configure the system initially then it will be disconnected &...
Page 3
4. Connect the cable coming from the top of the MyDict to terminals R1 & R2 inside your Panasonic fan coil unit. 5. Connect the cable coming from the bottom of the MyDict to the MyAir3 control box MyAir 3...
Page 4
MyDict - MyAir3 as Master with Panasonic A/C Troubleshooting Yellow LED – Short Flash, Long MyDict Normal operation Operation Normal Check cable between MyDict Communication error Yellow LED – 50/50 Flash MyDict & FCU or check dipswitch settings Check unit controller is connected;...
Need help?
Do you have a question about the MyAir3 and is the answer not in the manual?
Questions and answers