Thank you for purchasing this Clarion product. ∗ Please read this owner’s manual in its entirety before operating this equipment. ∗ After reading this manual, be sure to keep it in a handy place (e.g., glove compartment). ∗ Check the contents of the enclosed warranty card and keep it carefully with this manual.
Bitte ausbreiten und die nächste Seite lesen. / Volgende pagina uitvouwen en doorlezen a.u.b. / Glöm inte att vika ut och läsa nästa sida. / DB458RMC • Never play a compact disc with any cellophane tape or other glue on it or with peeling off marks.
Observera: Vik ut denna sida för att kunna se figurerna över bilstereons framsida medan du läser de olika kapitlen. Nota: Certifique-se de abrir esta página e consulte os diagramas frontais conforme realiza a leitura de cada capítulo. DB458RMC 3. NOMENCLATURE Notes: •...
Page 5
• Press and hold the [ ] button for 2 seconds or longer after selecting the ERASE mode, and the track is erased. • Perform preset scan while in the radio mode. When the button is pressed and held, auto store is performed. DB458RMC...
LCD Screen In extreme cold, the screen movement may slow down and the screen may darken, but this is normal. The screen will recover when it returns to normal temperature. DB458RMC Operation status indication Titles, PS names, CT(clock), etc. are displayed.
Be careful not to damage it by pressing on it with fingernails, pens, screwdrivers, etc. DCP Rear Panel Main Unit Front connector Note: • If the DCP is dirty, wipe off the dirt with a soft, dry cloth only. Main unit connector DB458RMC...
• Do not subject battery to heat, or dispose of in fire or water. Do not attempt to disassemble the battery. • Dispose of used batteries properly. DB458RMC Signal transmitter [ BND ] [ a ], [ d ]...
Press and hold the button for 1 second or longer to perform folder Repeat play while in the MP3/WMA disc, MC mode. Random play. Press and hold the button for 1 second or longer to perform folder Random play while in the MP3/WMA disc, MC mode. DB458RMC...
∗ The volume level is from 0 (minimum) to 33 (maximum). DB458RMC Note:Be sure to read this chapter referring to the front diagrams of chapter “2. CONTROLS” on page 5 (unfold). Switching the display 1.
If you press and hold the [a] or [d] button for 1 second or longer, local seek tuning is carried out. Broadcast stations with good reception sensitivity are selected. ∗ When local seeking starts, “LO” appears in the display. AM (MW/LW) FM1... DB458RMC...
Page 12
2. Press and hold one of the [DIRECT] buttons for 2 seconds or longer to store the current station into preset memory. DB458RMC Auto store Auto store is a function for storing up to 6 stations that are automatically tuned in sequentially.
2. Press any one of the [DIRECT] buttons to call out the regional station. 3. If the reception condition of the called out station is bad, press the [DIRECT] button of the same number. The unit receives a local station on the same network. DB458RMC...
∗ Even if you select FM1 or FM2, a TP station is stored into memory for FM3. DB458RMC This function enables you to listen to a broadcast of the selected programme type even if the unit is on a function mode other than radio.
If an emergency broadcast is received, all the function mode operations are stopped. “ALARM” appears in the display and the emergency broadcast can be heard. Cancelling an emergency broadcast If you press the [TA] button, emergency broadcast reception is cancelled. DB458RMC...
[ROTARY] knob to set the volume to the desired level (0 to 33). ∗ When the TA, ALARM or PTY interrupt ends, the volume returns to the level it had before the interrupt. DB458RMC CD/MP3/WMA Operations MP3/WMA What is MP3? MP3 is an audio compression method and classified into audio layer 3 of MPEG standards.
Page 17
• If you force a CD into before auto reloading, this can damage the CD. • If a CD is left in the ejected position for 15 seconds, the CD is automatically reloaded. (Auto reload). Set to MP3/WMA Play MP3/WMA Play CD Play MP3/WMA mark and DB458RMC...
WMA disc or M-CATCHER, and user titles input with this unit. 1. Press the [D] button to display the title. 2. Each time you press the [T] button, the title display changes in the following order: DB458RMC CD-TEXT disc User title (disc) Artist name User title (disc)...
Page 19
255 files can be recognized per play list. 2. Press the [a] or [d] button to change the track. 3. Press the [DN] button to move to the previous play list. Press the [UP] button to move to the next play list. DB458RMC...
• When writing to a CD-R/RW, etc., turn off the Disc At Once function. • When adding a play list, it is recommended to write it in the “Root” folder. DB458RMC MUSIC CATCHER Operations Note: • Playback of recordings made with MUSIC CATCHER is perfomed in the same way as for CD/MP3.
3 erasing modes are available. “TRK ERASE” : erase only one track. “FLD ERASE” : erase the whole folder. “ALL ERASE” : erase all the contents of the flash memory. 1. Press the [SRC] button to select the MC mode. DB458RMC...
∗ Up to 30 characters can be entered. ∗ The factory default setting is “Welcome to Clarion”. 2-1. Select “MSG INP<E>”. 3-1. Press the [ 3-2. Press the [a] or [d] button to move the cursor.
4. Press and hold the [T] button for 1 second or longer. 5. Press and hold the [BND] button for 1second or longer. ] button for 1 Number of titles 50 titles 64 titles Numbers Symbols Capital letters... ] button for 2 seconds DB458RMC...
Noise is generated or noise is mixed with sound. DB458RMC Note: • When the folder name was cleared, it automatically returns to the folder name which is added automatically during recording. Cause Replace with a fuse of the same amperage. If the fuse blows again, consult your store of purchase.
If not solved, executed ALL ERASE on the flash memory, and the problem is solved. Turn POWER/ACC off and then turn it on again, or eject the CD. The problem is solved. Measure Measure DB458RMC...
(4 minutes for each) Approximately 173 minutes, 43 tracks (4 minutes for each) Note: • Specifications and design are subject to change without notice for further improvement. DB458RMC General Output Power: 4 25 W (DIN 45324, +B=14.4V) Power Supply Voltage: 14.4 V DC (10.8 to 15.6 V allowable),...
Need help?
Do you have a question about the DB458RMC and is the answer not in the manual?
Questions and answers