Error Displays - Clarion DB458RMC Owner's Manual

Problem
Sound is bad
directly after
power is turned
on.
Wrong filename
Play list play is
not performed.

8. ERROR DISPLAYS

If an error occurs, one of the following displays is displayed.
Take the measures described below to eliminate the problem.
Error Display
ERROR 2 A DISC is caught inside the CD deck and is
not ejected.
ERROR 3 A DISC cannot be played due to scratches,
etc.
ERROR 6 A DISC is loaded upside-down inside the
CD deck and does not play.
ERROR 7 The format of the flash memory is damaged.
ERROR 8 There is a failure with the flash memory.
ERROR 9 An error during recording, scratch on the
disc, or error due to sound skips
If an error display other than the ones described above appears, press the reset button. If the problem
persists, turn off the power and consult your store of purchase.
Cause
Water droplets may form on
the internal lens when the
car is parked in a humid
place.
File system is not correct.
File name or extension is
not correct.
Cause
Measure
Let dry for about 1 hour with the power on.
Use ISO9660 level 1, 2 or JOLIET or Romeo file
system.
Use alphanumeric/ASCII characters for MP3/WMA
file name.
Use ".M3U" for the file extension of a play list.
This is a failure of CD deck's mechanism and
consult your store of purchase.
Replace with a non-scratched,
non-warped-disc.
Eject the disc then reload it properly.
Execute ALL ERASE on the flash memory,
and the problem is solved.
Turn POWER/ACC off and then turn it on
again, and the problem is solved.
If not solved, executed ALL ERASE on the
flash memory, and the problem is solved.
Turn POWER/ACC off and then turn it on
again, or eject the CD. The problem is
solved.
Measure
27
DB458RMC