Table of Contents
Advertisement
2.2 Name and function of each section
1. Torch
2．Gas hose: connected between torch and
gas distributor to deliver gas，
3. Adjusting pilot wheel for transverse: It is
to control torch transverse movement.
4.Track
5.Vertical moving bar
6.Reduce speed motor of web plate cutting
equipment
2.3 Specifications
1.Weight (body)
Accessory(track sections)
2.Machine dimension
3.Speed control
4.Power source
5.Cutting speed
7. Quick distributor: Flame is adjusted
only once and not adjusted again.
8.Handle: It is to move machine
9.
Track
pressure
machine on the H structural section
10. Clutch knob: Pulling knob on the left
side is off, pulling knob on the right side
is on.
：21.5kilograms
：15.5 kilograms
：400mm×340mm×440mm(Body)；
: 270mm×220mm×2200mm(Track)
：SCR control
： AC 220V±10％
：50～750 ㎜/min
- 6 -
CG1-2A H Beam cutter
plate:
Locate
Advertisement
Table of Contents
