Receiver Panel - Hall Technologies LYNX Series User Manual

Receiver Panel

No. Name
1 HDMI IN
2 HDMI OUT
3 CAT OUT
4 TOSLINK OUT
5 L/R OUT
6 IR IN
7 IR OUT
8 RS232
9 DC 12V
Hall Technologies July 8, 2022
Function description
HDMI input port, connect to HDMI source device such as DVD or
PS4 player with an HDMI cable
HDMI loop output port, connect to HDMI display device such as TV
or Projector with an HDMI cable.
Connect to CAT IN port on the receiving end with a CAT6 cable.
Connect to Toslink device.
Connect 3.5mm audio device
Connect to wideband IR Blaster cable. The IR signal is out to the
transmitter.
Connect to wideband IR Blaster cable. The IR signal is from the IR
IN port of the receiver.
Connect to RS232 control tool.
Plug DC 12V/1A power supply into the unit and connect the adapter
to an AC outlet.
(Note: The extender supports PoC function, it means that either
transmitter or receiver is powered supply by 12V/1A power adapter,
the other doesn't need power supply.)
Page 5 of 9