Equipment Installation; Interface To Install; Connected To The Device; Connected To The Connector - µ-Dimension EASYGET Manual

EASYGET Portable Fiber End-face Visual Inspector

2 Equipment installation

2.1 Interface to install

In order to be able to make EASYGET measurement of various products, we currently have
many different adapter interface, in the process of use, you can accord to different need to
replace the corresponding adapter interface.
Adapter interface installation drawing：
Installation steps：
1. A groove of the adapter aimed at the connector
2. Rotate the nut fixed up adapter interface

2.2 Connected to the device

2.2.1 Connected to the connector

EASYGET can fast and convenient and connectors, as shown in figure:
NOTE：
1. According to the different adapter interface, select the corresponding connector to use.

2.2.2 Handheld display connection

EASYGET use spring line USB2.0 interface connected to the handheld display
communication interface, as shown in figure:
8