Funke Gerber LactoFlash User And Reference Manual
  1. Manuals
  2. Brands
  3. Funke Gerber Manuals
  4. Laboratory Equipment
  5. LactoFlash
  6. User and reference manual

Funke Gerber LactoFlash User And Reference Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Funke-Dr.N.Gerber Labortechnik GmbH
Ringstraße 42
12105 Berlin
EC Declaration of Conformity
under the EC Machine Directive 06/42/EC
We declare that the machine referred to herein below, as put on the market,
has been designed and manufactured to the undamental safety and health
standards as defined in the EC Machine Directive. This Declaration shall
become null and void in the case of any modification made without our prior
consent.
Designation of the machine:
Maschinen type:
Serial number:
Applicable EC Directives:
EC Machine Directive as amended by 06/42/EC
Low Voltage (2006/95 EC
Electromagnetic Compatibility (2004/108/EC)
Berlin, this
______________________
Funke-Dr.N.Gerber Labortechnik GmbH
Dipl.-Ing. K. Schäfer, CEO
20
LactoFlash
FUNKE
FUNKE
FUNKE
FUNKE
GERBER
GERBER
GERBER
GERBER
C
C
C
C
LactoFlash
Milk analyzer
3530-
31. Januar 2013
Device for the Determination of Fat and SNF in Milk
LactoFlash
User and Reference Manual
Date: Januar 2013
Artikel-No: 3530
LactoFlash
GB
31. Januar 2013
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LactoFlash and is the answer not in the manual?

Questions and answers

Related Manuals for Funke Gerber LactoFlash

Summary of Contents for Funke Gerber LactoFlash

  • Page 1 EC Machine Directive. This Declaration shall become null and void in the case of any modification made without our prior consent. Designation of the machine: LactoFlash Maschinen type: Milk analyzer Serial number: 3530-...

  • Page 2: Table Of Contents

    After expiry of the guarantee period, these analyser How the LactoFlash works units are only sold after return of the defective unopened components.
  • Page 3 1 x parallel, 1 x serial (RS 232/ 9600 Baud) 6 Volt power supply for thermal printer (Item No. 7151) Dimensions: 30 x 24 x 33 cm (W x H x D) Weight: approx. 5.kg (net) LactoFlash 31. Januar 2013 LactoFlash 31. Januar 2013...

  • Page 4: Initial Operation / Setting Up

    Error message Cause / Resolution f) Connection cable for the parallel interface for connecting the printer g) Operating instructions for LactoFlash and printer h) 1 hose for the output (waste) Error 1. There was not enough sample quantity in the bottle -- the i) Erlenmeyer flask, 100 ml device has sucked in air.

  • Page 5: Initial Operation / Printer Connection

    It should first be ensured that no stale or precipitating milk (see above pH value “Enter” button. The “Enter” button is used to < 6.3) is being measured with the LactoFlash. However, if this does happen, start the function or action that has been then rinse thoroughly immediately until the water in the waste hose is clear.

  • Page 6: Initial Operation / Turning The Device Off / On

    This is performed with the B calibration. If you would simultaneously and remove the pump head. like to check the zero calibration process, please carry out a control FUNKE GERBER FUNKE GERBER Zero-Diluent“ as you used before FUNKE GERBER FUNKE GERBER measurement with the “...

  • Page 7: Operation Operation /Measuring

    How the LactoFlash works Operation 1. Structure of the device Operation /Measuring 1 Minute As can be seen from the picture and the operating principle diagram, the device First select the desired product. There are a total of 18 different product is equipped with 2 measurement cells.

  • Page 8: Operation / Rinsing

    Never operate the LactoFlash without rinsing or cleaning after finishing the measurements. The device contains two sensitive measurement chambers which are kept at a certain temperature. If milk protein precipitates in such a measurement chamber and is deposited on the walls, the measurement chamber will be destroyed.

  • Page 9: Operation / Cleaning

    Continue the procedure until the entire word has been entered. f) Press the “Enter” button. This confirms and stores what has been entered. LactoFlash 31. Januar 2013 LactoFlash 31. Januar 2013...
  • Page 10 A-type calibration is performed with a type of milk (A-type milk) that has lower Before it left the factory the LactoFlash was equipped with a fundamental levels of substances in all parameters, while the B calibration is performed with a calibration system based on various reference milks.

This manual is also suitable for:

3530

Table of Contents