Cd Mode Operations - Clarion DB245 Owner's Manual

Radio Operations
onds or longer.
Recalling ISR
Press the [ISR] button and the display will show
"ISR". Then the radio station previously memo-
rized will be selected. Press the [ISR] button
again to disengage the unit from the Recalling
ISR function.
Area Change
Use this function when you are using the car
stereo anywhere outside the U.S.
Switchable frequency spacing
This car stereo is initially set to tune in fre-
quency intervals of 10 kHz for AM and 200 kHz
for FM, the standard calibrations inside the U.S.
When using the unit outside the U.S., use the
following procedure to switch the frequency
range.
Initial Setting
(U.S. Standard)
Frequency
10 kHz
spacing
AM
Frequency 530 to
range 1,710 kHz
Frequency
200 kHz
spacing
FM
Frequency 87.9 to
range 107.9 MHz
The table below lists the frequency specifica-
tions for the U.S. and other countries.
Switching the area change
Outside U.S. (New Setting)
While pressing the [AM] button, press the [RPT]
button, then "outside U.S." will be selected.
Inside U.S. standard (Initial Setting)
While pressing the [AM] button, press the [SCN]
button, then the "U.S. standard" will be selected.

CD Mode Operations

Loading a CD
Insert a CD into the center of the CD insertion slot
with the labeled side facing up. "LOAD" appears in
the display, the CD enters into the slot and start play-
ing.
Notes:
• Do not put your hand, fingers, or foreign objects
into the CD insertion slot.
• If a CD has already been loaded, another CD
cannot be inserted. Do not insert another one
forcefully.
• Discs not bearing the
with the unit. CD-ROMs cannot be played.
• Some CDs recorded in CD-R/CD-RW mode may
not be usable.
New Setting
(outside U.S.) Listening to the Disc already Inserted
Press the [FNC] button to select the CD mode,
9 kHz
the CD will start playing.
Stopping (pausing) Playback
531 to
1,629 kHz
While the CD playing pressing the [s] button
will stop the CD and "PAUSE" indicate.
Press the [s] button again to resume play-
50 kHz
back.
87.0 to
Ejecting the CD
108 MHz
Press the [Q] button, then the CD will be
ejected.
Note:
• If the ejected CD is left as it is, it will be reloaded
after 15 seconds.
• However, single CDs will not be reloaded, so
make sure to remove them.
Top Function
Press the [BND] button, then the CD will start
playing from the first song (track number 1).
CD SLOT
mark cannot be played
13
DB245