Advertisement
b Connection Using WPS
1. Make sure that the button on the access point is ready to be pressed.
2. Hold down the Wi-Fi button (A) on the printer until the (orange) Alarm lamp (B) fl ashes once, then
release the Wi-Fi button after the fl ash.
3. Make sure that the (blue) Wi-Fi lamp (C) fl ashes quickly and the (green) POWER lamp is lit as shown
in the illustration on the right above, then press and hold the button on the access point within 2
minutes.
4. Make sure that the (blue) Wi-Fi lamp and the (green) POWER lamp are lit.
The network connection setup is now complete.
Advertisement
