Table of Contents
Advertisement
MAINTENANCE
1.
Use a clean rag to remove
loose dirt from around fuel
cap and empty fuel tank.
Do not damage fuel line while removing fuel filter from tank or line.
2.
Pull the fuel filter from the tank.
3.
Do not remove the wire coil clamp to remove the fuel filter. Pinch the
fuel filter with the fingers on one hand and the fuel line with the other
hand. Pull and twist slightly to separate.
4.
Install the new filter with the reverse action.
Note: Federal EPA regulations require all model year 2012 and later
gasoline powered engines produced for sale in the United
States to be equipped with a special low permeation fuel
supply hose between the carburetor and fuel tank. When
servicing model year 2012 and later equipment, only fuel
supply hoses certified by EPA can be used to replace the
original equipment supply hose. Fines up to $37,500 may be
enforced for using an un-certified replacement part.
Spark Plug
Level 2.
Parts Required:
Use only NGK BPMR8Y spark plug otherwise severe engine damage
may occur.
34
Tune-Up Kit
SRM-2320T
X7732278300
© 08/2019 ECHO Inc.
Advertisement
Table of Contents
