Assembly - Hausmann 6132.468 Instruction Manual

ASSEMBLY

Tools Required
#2 and #3 Phillips
Screwdrivers
ASSEMBLE LOWER AND UPPER CROSS BRACES TO LEGS WITH THE
FOLLOWING COMPONENTS
K (24) L (24)
NOTE: Use pan head screws (K) and nuts (L) to assemble all components
except the tabletop and leveling device
NOTE: Initially, loosely assemble metal components. Fully tighten
components at the end of the assembly process.
1. Assemble a long upper cross brace (A) to the two legs (E). Long cross
brace (A) is assembled to INSIDE of legs (E). See Figure 1.
E
2. Assemble a long lower cross brace (C) to two legs (E). Make sure flange
side is in the LOWER position. (Flange side has mitered corners.)
See Figure 2.
18
Adjustable Wrench
E
C
Fig. 1
Fig. 2