Table of Contents
Advertisement
12.5
Control actions of additional applications
12.5.1
Presence simulation
The absence of the residents in a building can be fairly realistically simulated via the presence
simulation, to increase the protection against unauthorized access. For this purpose the ABB
SmartTouch
®
specifically records all actions for up to 20 objects every minute of the whole day
(up to 0 o'clock) and can then replay them again.
Notice
–
Please note that you must always create a presence simulation beforehand,
so that the simulation can be played back later!
–
For this the device must have been active once for at least one day (up to 0
o'clock) and have recorded telegrams (per minute). Otherwise the message
that no data are available is displayed at the start of the application.
–
The application always uses the telegrams of the previous day. If no data are
available on the previous day, the data of previous days are used.
The presence simulation application is called up as follows:
Fig. 56:
Overview of presence simulation
Product manual 2CKA001473B5343
Operation
│332
Hide quick links:
Advertisement
Table of Contents
