Table of Contents
Advertisement
TOE KICK PANEL PREP
1
2
30
Recheck toe kick panel size and
specifications. Refer to page 13
for details.
Measure distance from floor to bottom
of grille to determine the position of the
toe kick mounting plate.
Secure supplied toe kick mounting plate
in trim kit to the toe kick panel.
Install kit E
SECURE TOE KICK
1
2
3
4
Loosen the screws on both toe kick
depth adjustment brackets.
Slide both depth adjustment brackets
all the way forward and slightly tighten
the screws.
Attach the toe kick to the depth
adjustment brackets. The magnets
should auto-locate.
Push the toe kick back to the desired
depth before removing. If toe kick depth
is less than 90mm, attach the additional
foam block.
Hand tighten the depth adjustment
screws and refit the panel.
Advertisement
Table of Contents
